FTM260-G4D - LEVEL SWITCH, SOLIDS...

FTM260-G4D - LEVEL SWITCH, SOLIDS... Simple Type: Limit Switch

LEVEL SWITCH, SOLIDS... Simple Type: Limit Switch

FTM 260 is a compact limit switch to which miniature contactors, solenoid valves and programmable logic controllers (PLC)can be directly connected.

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

Ambient Temperature: –40 °C ... +70 °C (–40…+160 °F), see also diagram below on this page
Bulk density of material: min. 100 g/I
Climatic protection: Climatic protection to IEC 68, Part 2-38, Fig. 2a
Design: Compact unit, plug-in electronic insert
Electrical connection: Screw terminals on electronic insert for max. 2.5 mm² wire
Fail-safe mode: Minimum or maximum fail-safe mode, switchable
Function: Limit switch (binary) for powdery and fine-grained bulk solids
Grain size of material: up to 10 mm (0.4 in)
Ingress Protection: IP 66 to DIN 40 050
Material: Process connection and vibrating fork stainless steel 1.4301 (SS 304);
Mechanical load on fork: 600 N, lateral (on fine edges of tines), static
OPERATING PRESSURE: pe –1 bar ... +16 bar (–14.5…+230 psi), burst pressure >40 bar
Orientation: Any position
Power failure signal: Output open or relay de-energised
Power Supply: 10 ... 55 V, ripple max. 1,7 V, 0 ... 400 Hz, current consumption max. 15 mA,protection against reverse polarity
Process Connections: Tapered thread R 1½ to DIN 2999 Part 1;
Product temperature: –40 °C ... +150 °C (–40…+300 °F), see also diagram below on this page
Storage Temperature: –40 °C... +85 °C
Supplementary documentation: System Information “Soliphant II” - SI 024F/00/e
Switching Time: Approx. 0.6 s when covered, approx. 1.4 s when free
Weight: approx. 1.1 kg with electronic insert